|
.gif) |
 |
| Systematic Photometric Design
and Optic Control |
The Series LTMS
Corner Mount Security Luminaire provides years of rugged service, and features the best in
photometric design and optic control for providing even levels of high intensity lighting.
|
| Exceptional Strength: |
| Constructed with a housing of 14 gauge
Cold Rolled Steel, every fixture is seam welded and ground for a smooth finish. |
Special
Detailing: |
| The one piece cold rolled construction
door frame features an internal lens frame. The door opens on a continuous 16 gauge piano
hinge (quarter knuckle) for ease of maintenance. The luminaireis sealed with a
silicone-free, non-toxic black closed cell gasketing to prevent light leaks. |
| Value Engineered: |
| For maintenance purposes, an optional
Power Assembly (a one unit assembly holding the ballast, sockets, and reflector) requires
only one replacement part (refer to options page). |
Lens
Protection: |
| The fixture’s lens is held with
continuous 14 gauge L-angles held with thru studs. |
| Superior Lighting Performance |
| The optics of each luminaire are
engineered for the best possible balance with a lamp location and reflector design that
provides 89% minimum reflectance, and a lens opening which will provide uniform light
levels. The fixture features Bi-pin base T12 fluorescent lamps and H.P.F. rapid start. 120
volt, Class PETL/CBM ballast. |
Tamper-Resistant: |
| To prevent access by unauthorized
personnel, the fixture is fastened by two stainless steel tamper-proof screws (McGuard
standard) (for other fasteners, please refer to options page). |
Meeting
Industry Requirement: |
| All Series LTMS Luminaires are listed by
Underwriters Laboratories and are CSA approval. |
